Factors That Affect Dot Gain
Dot Gain Causes
1. Ink. The ink itself plays the single most influential role in controlling dot gain. Properties such as viscosity and tack are a good start. These properties we look at first when chasing dot gain problems.
2. Temperature. The best place to start with this is the temperature of your oscillating rollers. Use a infrared sensor to measure the temperature across each side of the transfer rollers, and in particular the oscillating rollers if you have a heat set press. The optimum temperature? 27 degrees Celsius. How do we know that? I'll cover that in a future article. But I'll say in short that this is the temperature with which you will get the least piling.
3. Pressure. Blanket to blanket, plate to blanket and form roller to plate all play a role. To find out more, I've written another more detailed article about how this happens.
4. Blankets. We've found that when the blankets get old, dot gains will go a little sketchy. Sometimes all you have to do is change the blanket for the problem to get better. Also, the more piling on the blanket, the sharper your dots become.
5. Paper. Glossy or matte, you will get different dot gain settings based on how the print lays down.
6. Machine. In this instance, it's not only the condition of the bearers that make a difference. which could be wearing or causing slur. The conditions of all the bearings, gears and rollers come into play.
7. Ink and water balance. Some put this factor much higher, but it shouldn't play such a large factor if you are in the proper ink and water balance window.
8. Plates. Again, raw materials will make a difference in this aspect. Additionally, plate wear can cause dot gain.
9. Plate making. If the plate is scrubbed properly can make a difference. Additionally, the type of dots used can make a difference. For example, we recently went to an elliptical dot. This meant about a two percent increase in dot gain.
It's always a work in progress for us. It is something inherent to the process that will unfortunately never go away. However I hope our little table above can give you a little help in case you're hunting for ways to reduce dot gain.
How to Troubleshoot Offset Printing Ink
The Web Press Troubleshooting Guide