Laser Cutting and Engraving: Move Beyond the Cutting Table
For a print service provider (PSP), finishing can be the point where a fast digital workflow slows down, and with automation on the brain, who still wants to hand cut something?
Printed fabric still needs to be cut. Acrylic may need an edge treatment. Customized pieces can demand setup and handling after the printer finishes its job. We paid a visit to laser cutting and engraving vendors Trotec, SEI Laser by Matik, Summa, and Epilog Laser at the 2026 PRINTING United Expo — where they argued that laser cutting and engraving technology can address those steps while opening up new products and capabilities.
Their interviews point to five key takeaways: lasers can combine cutting with edge finishing; vision and software can simplify print-to-cut work; automation can ease labor demands; laser engraving can add value to existing products; and familiar assumptions about lasers deserve a closer look.
1| Cutting Can Also Finish the Edge
The appeal of laser cutting begins with what happens at the cut. For some materials, a laser can leave an edge that needs less work afterward.
Braden Todd, owner of GS2 Awards, a Trotec distributor, explains, “As far as finishing, if you’re printing and then doing print-to-cut, the laser is going to cut the material, whether it’s acrylic, wood, fabrics, and then when it cuts, it’s going to essentially seal the edge.” He adds, “If it’s a fabric, it will cut and then melt the fibers together, so then it doesn’t fray, it doesn’t rip, it doesn’t tear. If it’s acrylic, then you get the flame polished edge, so there’s no post processing after that.”
For a shop producing textile displays, flags, or garments, the potential to reduce fraying is relevant. For acrylic work, a polished edge can eliminate an additional step. Those outcomes are material dependent, making sample cuts on a shop’s actual substrates important.
Steve Leibin, president of SEI Laser by Matik, sees lasers that fit with printing as part of a wider shift in production methods.
“Laser is the digital cutting process to match with your digital printing process,” Leibin says. “Now you have a complete digital workflow that’s extremely efficient, uses less waste, lowers changeovers. You have greater creativity and flexibility in what you do.”
2| Vision Systems Can Make Print-to-Cut Work Easier
For shops already printing graphics, the bridge to laser cutting often lies in how the machine finds the image. Registration marks remain one approach, but some systems can trace printed outlines and generate the cutting path through software.
Randi Kerkaert, product manager for Summa, describes a laser setup focused on textiles.
“What we do is either find registration marks or we look at the image and create the outlines,” Kerkaert says. “So, you don’t need to have a cut file. It’s our software that creates the cut file.”
Ultimately, the choice depends on the job. Kerkaert says garments generally use the printed outline, so the cut follows the image, while other products like flags call for registration marks and a file to produce an exact size.
Cutting to the visible edge of a garment graphic is a different task from producing a flag to fixed dimensions. While both are print-to-cut applications, they call for different ways of locating the cut.
Todd highlights a related change in Trotec’s Speedy Blackline series. “Our print-and-cut now, instead of having to use ridge marks, we can actually do it without ridge marks, and it just auto-detects the cut lines.”
Daniel Molchan, a Midwest distributor for Epilog Laser, also sees print-and-cut work expanding the market. Molchan points to “Finding a fiducial mark or pre-printed registration point and then cutting that.” He says the capability has “opened a lot of doors,” and that PSPs should consider artwork preparation and job setup alongside cutting speed.
3| Automation Can Reduce Handling and Setup
Labor remains a concern for PSPs, and the people interviewed described several ways laser systems can remove operator decisions or shorten changeovers. Their examples range from saved material settings to barcode-driven job retrieval and automated handling of large sheets. Kerkaert says Summa’s material manager handles speed and power settings, and with printed outlines, the workflow can be straightforward.
“It’s just a matter of loading up the material, pressing a button, and it just continues, continues, continues.” For file-based work, he says a barcode printed with each job lets the software retrieve the correct file.
“So, you don’t need to interact with your machine. The only thing you need to do is either put a basket in front or have somebody constantly pick the materials,” Kerkaert says. “You don’t need highly skilled labor. You don’t need somebody trained for, you know, a week just to run the machine.”
Leibin points to SEI Laser by Matik’s Mercury platform, which he says can change over 4x8 ft. or 8x5 ft. sheets in less than a minute.
“Throughput gains are two to three times what they’re probably doing now. So, it’s less labor to do the same or more work,” Leibin says.
Todd describes a management page in Trotec’s new Speedy Black Line system that lets users see which laser is running; and Molchan points to the Fusion Ascent’s pass-through capability and two-camera system. A shop’s best measure of automation is whether those features reduce setup, handling, and file-matching work in its own jobs.
4| Engraving Adds Personalization and Texture
Cutting is only part of the opportunity. The OEM reps also describe engraving as a way to give printed or otherwise finished items a new appearance, texture, or personal detail. That can enable a shop to expand an existing product instead of developing an entirely new one.
Molchan says, “Taking the laser system to add personalization or add custom logos and things like that go a long way to taking a valued item that you already have and giving it more value for very little effort.”
Kerkaert sees engraving as an option for both rigid materials and apparel. “If you take acrylic and you print on it, it’s nice,” he says. “But if you engrave it, it generates a little bit more pizzazz, so it looks a bit more, you know, high end.”
Leibin calls the laser itself an embellishment tool. “So, you can create really unique designs that catch attention. You can also create texture to the substrate, or different levels of cut, because you can control the laser very precisely, so it gives a texture effect to the product.”
In addition to cutting, laser systems can be used for surface decoration, such as this wood-burning effect.
Because the range of applications can be daunting, Todd advises starting with an area of interest while staying open to incoming opportunities. “I basically tell everybody [to] find what you’re passionate about and then pursue that, but then be open to everything else that’s going to come your way because you can do everything from a simple beer mug up to medical devices.”
5| Look Past the Common Misconceptions
The interviews also highlighted assumptions that can make laser technology seem less useful or even more intimidating. Todd cautions against assuming that a shared component label means identical performance, specifically when it comes to RF (radio frequency) tubes. RF tubes are a type of CO2 laser tube that uses radio frequency energy instead of high-voltage direct current to excite the gas mixture inside a sealed metal or ceramic enclosure.
“An RF tube does not mean all RF tubes are the same.” He adds, “But there are metal tubes, there are ceramic tubes, and there’s a huge difference between how they cool and dissipate the heat, and then extend the life expectancy of that laser too.”
Laser etching on items, such as the water bottle shown, opens avenues of opportunity for the decoration of, for instance, promotional items.
Kerkaert addresses the image of a laser as a movie-like beam of fire, or the scene in “Austin Powers: International Man of Mystery” featuring, to quote Dr. Evil, “Sharks with frickin’ laser beams attached to their heads.”
“A laser does not burn. You see smoke, but it’s not fire,” Kerkaert says.
Leibin says browning and discoloration are effects some customers associate with lasers, but says they are based on older or less refined implementations.
“We have really refined the control of the laser beam, so we don’t have those types of issues,” Leibin says.
His claim underscores why sample cuts on the intended substrate are more useful than assuming every laser will produce the same edge.
Price comparisons can also miss part of the purchase, according to Molchan. He says of Epilog, “You’re getting the support of the factory. You’re getting a distributor that is like your personal kind of representative.” Training and ongoing assistance deserve a place beside machine specifications, particularly if laser production is new to a production staff.
Taken together, the interviews make a case for comparing laser cutting and engraving against other processes. The strongest opportunity, they intimate, may be where one machine changes both the production process and also diversifies what a shop can offer its customers.
- Categories:
- Finishing - Digital
Gabby Houck is an associate content editor for the printing & packaging group at NAPCO Media/PRINTING United Alliance.






