PRESS
Diagnosing differences in registration
Facebook
Facebook
Twitter
Twitter
LinkedIn
LinkedIn
Email
Email
0 Comments
Comments
* Thin paper may collapse at the front lays. To prevent this, engage all front lays.
* The problem may be a different gripper bite on the drive side and the operator side. Set a parallel gripper bite on the drive side and the operator side in the control console.
* When it pulls off the blanket, the sheet may be stretched by excessive adhesion to the blanket surface. Address this by reducing the printing pressure (contact pressure) between blanket cylinder and impression cylinder. Another corrective is to use a blanket with quick-release properties.
« Previous 1 2 All
0 Comments
View Comments
Related Content
Comments