Prisco Goes Green and Introduces Several New Products
August 2007
|
Optimized Automated Press Cleaning Reduces Environmental Impact and Increases Productivity
NEWARK, NJ—August 15, 2007—Prisco (Printers’ Service) is proud to introduce our expanded line of Prisco PREPAC® wet cleaning rolls for use with the Baldwin IMPACT® blanket and impression cylinder cleaning systems.
PREPAC Technology now offers enhanced performance as well as the service and support provided by Prisco. Baldwin’s latest technology developments offer an easy and effective way to significantly lower total VOC emissions in your plant and is a critical component of the GO GREEN WITH PRISCO initiative.
Prisco PREPAC provides the most complete range of cleaning media and low VOC solvent combinations designed for a wide range of printing applications and optimal cleaning performance
The Prisco PREPAC line of products provides:
The lowest VOC content of any wet roll cleaning media on the market.
Vacuum-sealed packaging assuring consistent cleaning from roll to roll.
Solvents that have been optimized to prevent damage to cleaning systems.
More cleaning cycles per roll and lower cost per wash than competitive products.
If you have a dry cloth system on a Komori press, Prisco makes it easy to convert to Baldwin’s PREPAC technology with our low cost conversion programs. And, if you have a press without an automatic blanket or impression cylinder cleaning system, we can retrofit your press with a Baldwin IMPACT system.
Only Prisco offers the full array of one-stop service, support, product range and programs for optimized automatic press cleaning. We are Baldwin Technologies exclusive partner in North America.
Minimizing Chemical Waste Is a Key Environmental Strategy
Prisco is proud to introduce the second generation of the world’s most effective fountain solution filtration and recycling system, the new FloClear® G2. Fountain solution treatment is a critical component of the GO GREEN WITH PRISCO initiative.
FloClear circulates contaminated fountain solution through its multi-stage processing system returning it in fresh condition to a central chilling unit. The system eliminates fountain solution contamination from paper, ink and solvents. This results in greatly reduced chemical waste, less total fountain solution used with improved press control and printing quality. Chiller maintenance is greatly reduced, resulting in high press productivity.
New innovations to the original FloClear include:
System Monitoring - The controller monitors run-time, filter back-pressure and pump pressure
Pump Protection - The G2 Controller constantly watches for low pressure and will shut down if there is a fault.
Splitter Control – A FloClear G2 system may be retrofitted to serve two central chiller units by use a splitter system. The G2 Controller will control the function of the splitter valves.
NEWARK, NJ—August 15, 2007—Prisco (Printers’ Service) is proud to introduce our expanded line of Prisco PREPAC® wet cleaning rolls for use with the Baldwin IMPACT® blanket and impression cylinder cleaning systems.
PREPAC Technology now offers enhanced performance as well as the service and support provided by Prisco. Baldwin’s latest technology developments offer an easy and effective way to significantly lower total VOC emissions in your plant and is a critical component of the GO GREEN WITH PRISCO initiative.
Prisco PREPAC provides the most complete range of cleaning media and low VOC solvent combinations designed for a wide range of printing applications and optimal cleaning performance
The Prisco PREPAC line of products provides:
The lowest VOC content of any wet roll cleaning media on the market.
Vacuum-sealed packaging assuring consistent cleaning from roll to roll.
Solvents that have been optimized to prevent damage to cleaning systems.
More cleaning cycles per roll and lower cost per wash than competitive products.
If you have a dry cloth system on a Komori press, Prisco makes it easy to convert to Baldwin’s PREPAC technology with our low cost conversion programs. And, if you have a press without an automatic blanket or impression cylinder cleaning system, we can retrofit your press with a Baldwin IMPACT system.
Only Prisco offers the full array of one-stop service, support, product range and programs for optimized automatic press cleaning. We are Baldwin Technologies exclusive partner in North America.
Minimizing Chemical Waste Is a Key Environmental Strategy
Prisco is proud to introduce the second generation of the world’s most effective fountain solution filtration and recycling system, the new FloClear® G2. Fountain solution treatment is a critical component of the GO GREEN WITH PRISCO initiative.
FloClear circulates contaminated fountain solution through its multi-stage processing system returning it in fresh condition to a central chilling unit. The system eliminates fountain solution contamination from paper, ink and solvents. This results in greatly reduced chemical waste, less total fountain solution used with improved press control and printing quality. Chiller maintenance is greatly reduced, resulting in high press productivity.
New innovations to the original FloClear include:
System Monitoring - The controller monitors run-time, filter back-pressure and pump pressure
Pump Protection - The G2 Controller constantly watches for low pressure and will shut down if there is a fault.
Splitter Control – A FloClear G2 system may be retrofitted to serve two central chiller units by use a splitter system. The G2 Controller will control the function of the splitter valves.
|
