Printing Impressions

You will be automatically redirected to piworld in 20 seconds.
Skip this advertisement.

Advertisement
Open Enrollment | Subscribe to Printing Impressions HERE
Connect
Follow us on
Advertisement
 

LithoTechnics to Demonstrate Metrix-Driven Printing Automation at drupa

April 23, 2012
Get the Flash Player to see this rotator.
 
EDMONDS, WA—April 23, 2012—LithoTechnics Inc., developer of Metrix, the intelligent, automated job planning and imposition system, announced it will be demonstrating more ease of use, automation and integration than ever before, along with a host of practical and productive new Metrix features at the drupa trade fair in Dusseldorf, Germany.

Metrix will be shown in the LithoTechnics stand in Hall 7/C22, and also in many partner stands throughout the exposition. Demonstrations of Metrix can be seen on the stands of EFI (Hall 5/C01), Fujifilm Europe (Hall 8b/A25-1), Impressed (Hall 7/C20), Tharstern (Hall 5/A36), and in the Drupa Innovation Parc.

• Previews – Metrix 2012.0 has the ability to display page previews. This functionality is particularly useful for Metrix operators in prepress, who need to make last minute placement changes based on ink coverage and colors. Intervention to avert press problems has never been easier, or more intuitive.

• Intelligent Automation – Metrix has always calculated gutters for flat work, and now intelligently calculates gutters for bound work as well, based on the trimming capabilities of the selected binding machine and the fewest number of post press cuts. This sophisticated algorithm extends Metrix Auto Layout, which can be commanded from within the Metrix interface, or can be invoked by the Metrix Automation Module. The Metrix Automation Module, which was introduced in the Fall of 2011, receives XML files in a hot folder, processes them according to job characteristics and available equipment, and pushes complete plate-ready imposition files out the other side – unattended!

• Integration – Metrix 2012.0 integration with “populated” Prinergy workflows is tighter than ever before. Metrix is now able to automatically fetch the low-resolution file generated at the refining/preflighting stage, and use it for the Metrix preview. This also means that production-ready content on the Prinergy system is automatically assigned in Metrix, eliminating a step on the Prinergy side.

• Metrix 2012.0 also boasts tighter integration with Agfa Apogee, as well as Esko Automation Engine.

• Productivity Features – N-Up Folding, used to eliminate unnecessary cutting and folding on long-run jobs, is now part of the N-Up Binding Module of Metrix 2012.0. Like all Metrix features, N-Up Folding is simple to use and extremely powerful.

Rohan Holt, president of LithoTechnics, Inc., and inventor of Metrix, said, “drupa is a milestone for us—Metrix 1.0 was launched at Drupa 2004, and it is especially fun to see how far Metrix has come since then. Metrix is closer than ever to our vision of what automated production planning and imposition can and should be.”
 

Companies Mentioned:

COMMENTS

Click here to leave a comment...
Comment *
Most Recent Comments: